![]() The same process on your Series III console applies to your chosen DAW.A work around for this is to simply patch the plugins return to a spare channel as covered in Step 4 above. This is because those channels are required to have their inputs set to "Network", for plugins to work they need to be "USB". If you are sourcing inputs from a networked Series III console/rack mixer or NSB then it's not possible to return the plugin to the same channel that the instrument is plugged into. This knowledge base article covers using only on Series III mixer with instruments plugged directly into the console.This allows greater control of the plugin, handy when say using plugins for vocal reverb etc. When done you now have the original instrument on channel 1 and the 100% wet reverb on channel 2. Then change channel 1 on the mixer to have its input back to Analog. ![]() I've also changed the plugin to be 100% wet. Ensure you change the input source for channel 2 on the mixer to be USB. In this example I'm sending the plugin to channel 2 on the mixer. In Studio One simple route the channel out to a spare channel on the mixer. ![]() This is used when you want to have your original instrument but blended with the plugin. Step 4: How to keep the original instrument signal and blend in your plugin Depending on the plugin used you can set the amount of Wet/Dry signal back to the mixer. Now any changed applied to the channel in Studio One will be heard on the mixer. You can confirm this by muting the channel in Studio One which is mute the channel on the Series III mixer. The audio you are hearing on Channel 1 on the mixer is the Analog input sent to Studio One and back into the mixer. Then go back to Studio One and re-enable the "Monitor" button. On the Series III mixer go to Channel 1 and change the input source to "USB" and change the "Digital Send Option" too "Analog". This is important to avoid digital feed back as you set up the Series III mixer. Once confirmed turn off the "Monitor" button. Test the instrument to ensure you are seeing its levels on Studio One, you will need to enable the "Monitor" button on Channel 1 in Studio One. Once you have the session created drag and drop "Room Reverb" onto Channel 1 in Studio One.Įnsure you have gain staged your instrument correctly. In this example we are using a reverb plugin on channel 1 on the mixer and on Studio One v4 Pro. Once done go to channel 1 in Studio One and insert your chosen plugin and drag and drop it into channel 1. The reason for using templates is that by default all the channels in Studio One are setup on a 1:1 basis, we do not have to do any routing in Studio One, it is done for you. Templates are a feature of Studio One Artist and Pro versions only. Launch Studio One and create a new song using the template for your connected mixer. The USB cable that came with your mixer is ideal for this. If you already have Universal Control installed, the program should prompt you that a new update is available once opened and connected to the Internet.Ĭonnect your mixers USB port to the your computer and ensure you are using a direct connection and a working USB cable. Please see the links above in regards to updating your Firmware and downloading the latest Universal Control. Step 1: Ensure you are using the most up to date Firmware and Universal Control In this article we will cover how to setup your Series III mixer to use plugins live from Studio One. StudioLive Series III Rack mixer - Firmware Update StudioLive Series III Console - Firmware Update Before proceeding, please be sure your firmware is updated on your StudioLive,
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |